AJIYA Bullet Resistant Glass range is designed to stop bullets and prevent spalling on the opposite side of the impact, while maintaining complete visibility and light transmission.

AJIYA Bullet Resistant Glass is a high quality composite that combines the properties of DuPont SentryGlas® Plus and Spallshield ® with the abrasion resistance of glass. These laminated glass vary in thickness and composition according to the type of weapon and ammunition used, and the degree of protection required.
 
  Non Spalling
  The Spallshield® at the back face of the panel will provide anti spalling protection.
Anti-Lacerative
 
Due to Spallshield®, a person impacting the glass on the protected side will not be lacerated by broken glass.
UV Protection
 
Nearly all the sun's damaging UV rays will be filtered out by the panel, thus providing protection against discoloration and damage to fabrics, furniture, wall coverings, furnishings, artworks, etc.
Thinner Panel
AJIYA Bullet Resistant Glass is currently one of the thinnest glass clad bullet resistant glass in the market for the respective protect levels.
 
 
Classification of Panel
Type of
Weapon
Calibre
Ammunnition
Range
No. of strikes
Panel Thickness
G0
9mm handgun
9mm Parabellum
8.0g FMJ
3m
3
16.78
G1
.357 Magnum handgun
.357 Magnum
10.2g JSP
3m
3
25.06
G2
.44 Magnum handgun
.44 Magnum
15.6g SWC
3m
3
32.06
R1
5.56 Rifle
5.56mm x 45
M193 3.6g
10m
3
37.06
R2
7.62 Rifle
7.62mm x 51
Nato Standard 9.3g
10m
3
48.34
 

 
Notes :
The above protection levels are based in part, on the Australian Standards ASNZ2343. Due to research and development, the above specifications are subject to change.

Abbreviations : FMJ - Full Metal Jacket, JSP - Jacketed Soft Point, SWC - Semi Wadcutter

Banks
Cash Counters
Jewellery Stores
Copyright © 2002-2006 Ajiya Berhad. All rights reserved.