Tempered Safety Glass
Product Description
AJIYA Tempered Glass is heat treated glass with a residual surface compression minimum of 69 MPa (10,000 psi) or an edge compression not less than 67 MPa (9,700 psi). It is manufactured by heating ordinary float glass to its softening point (approximate 600 ~ 650 deg C) and then followed by cooling the glass rapidly by quenching it with an uniform blast of air on both surfaces simultaneously. AJIYA Tempered Glass, when broken, breaks into a multitude of small fragments, thus protecting against serious injuries.

Product Features
Safety & Standards
AJIYA Tempered Glass is safety glazing material, conforming to the requirements of MS 1498, ASTM C 1048, ANSI Z97.1, BS 6206, etc.
AJIYA Tempered Glass is approximately 4 to 5 times stronger than ordinary annealed glass. It has a higher bending strength and is more resistant to impact.
Thermal Stress Resistant
AJIYA Tempered Glass is more resistant to thermally induced stress and can, therefore, resist thermal shock which can cause ordinary annealed glass to crack.
AJIYA Tempered Glass cannot be drilled, cut or edged after being heat treated. All dimensions and specifications must be determined before the glass is tempered.
In addition to clear glass, AJIYA Tempered Glass also comes in various colors or tints, and can be reflective or low energy as well.


Special Heat Soaking
AJIYA also offers heat soaking for its tempered glass. This process purposely to reduce or minimize the risk of spontaneous breakage after installation due to Nickel Sulphide inclusions induced in the tempered glass.


SpecificationProduct Size(mm)Product Thickness(mm)
Type of Process Minimum Maximum Minimum Maximum
Tempered Glass 180 x 180 6000 x 3000 3.0 19


Product Application
Curtain Walls
Shop Fronts
Flameless Glass Doors
Escalator Side Panels